Terminal Crimping There are 22 products.

per page
Showing 13 - 22 of 22 items
  • The Gamma T12 is designed as a low cost Crimping Press for smaller crimping applications. An asynchronous self braking 0.5hp motor producing 1 tonne of power through the RA40 gearbox suitable for crimping cables up to 2.5sq.mm

  • The Gamma T20 Crimping Press with a heavy duty base plate, The main Shaft is supported by two conical bearings for reliability and extended life. The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press. This offers accurate, quality cable...

  • The CSM Cable Stripping Module is manufactured for both the T20 and T25 Crimping machines and can be supplied from new as a stripping and crimping machine or retrofitted to an existing crimping press. This offers accurate, quality cable stripping and crimping with the machine cycle being initiated by the insertion of the cut cable end triggering the...

  • The Gamma T25 electromechanical Crimping Press is of cast iron construction with the main Shaft supported by two conical bearings for reliability and extended life. The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press. This offers...

  • TERMINAL APPLICATORS Gamma's Quick Change miniapplicators can be fitted to their complete range of crimping  / stripping crimping machines available for both side and rear feed terminals in bandolier form. The applicators supplied with the three point quick release applicator plate makes them compatible for use with most crimping machine in the market place.

  • The Gamma T50 designed as a heavy duty power press is for large crimping applications. The Press is of a steel plate construction on a heavy duty base plate incorporating all the safety features included in the T20 and T25 Crimping Presses.

  • Introducing the new KS-T921 Electric Wire Splicing Machine. This splicing machine provides an advanced method for producing low cost, high reliability connections. The KS-T921 Wire Splicing Machine is able to feed, cut, form and splice which eliminates the need for expensive pre-formed crimps

  • Introducing the new KS - T922 Pneumatic Copper Tape Splicing Machine. This splicing machine provides an advanced method for producing low cost, high reliability connections. The KS-T922 Wire Splicing Machine is able to cut, form and crimp the copper tape in one motion with no wasted material.

  • The Crimp Cradle uses a highly efficient tooling set which provides a mechanical advantage, when handcrimping of approximately 10 to 1. If a hand tool requires 20Kg of operating force the Crimp Cradle willrequire only 2Kg to perform the same operation.

  • Benefits of using the Crimp Table:◦ Up to 400 pieces per hour can be achieved due to less handling and shorter cycle times. Reduces operator fatigue due to less effort.◦ Greatly reduces risk of Repetitive Strain Injuries.

Showing 13 - 22 of 22 items