Terminal Crimping Machines There are 11 products.

Showing 1 - 11 of 11 items
  • Easy to operate with high flexibility    No compressed air necessary    Crimping die easy to change    Carry handle enables different work stations    Lower energy costs compared to compressed air machines    Flexible use thanks to a wide range of crimping dies    Positioning aids simplify crimping of contacts

  • The fatigue-free alternative to hand crimpers    Easy to operate    Light weight    Robust housing    Fatigue-free work    Maintenance-free

  • Paper winding up unit ROLL.UP.100for separating paper of crimp contact-roll    Papers are precisely wound    mounting on all standard presses    synchronous run    Winding width 60mm (standard); Variant to 150mmWidth of coil:     ROLL.UP.100     up to 2.36“ (60,0 mm)ROLL.UP.150     up to 5.91“ (150 mm)

  • The Gamma T12 is designed as a low cost Crimping Press for smaller crimping applications. An asynchronous self braking 0.5hp motor producing 1 tonne of power through the RA40 gearbox suitable for crimping cables up to 2.5sq.mm

  • The Gamma T20 Crimping Press with a heavy duty base plate, The main Shaft is supported by two conical bearings for reliability and extended life. The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press. This offers accurate, quality cable...

  • The Gamma T25 electromechanical Crimping Press is of cast iron construction with the main Shaft supported by two conical bearings for reliability and extended life. The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press. This offers...

  • The Gamma T50 designed as a heavy duty power press is for large crimping applications. The Press is of a steel plate construction on a heavy duty base plate incorporating all the safety features included in the T20 and T25 Crimping Presses.

  • Introducing the new KS-T921 Electric Wire Splicing Machine. This splicing machine provides an advanced method for producing low cost, high reliability connections. The KS-T921 Wire Splicing Machine is able to feed, cut, form and splice which eliminates the need for expensive pre-formed crimps

  • Introducing the new KS - T922 Pneumatic Copper Tape Splicing Machine. This splicing machine provides an advanced method for producing low cost, high reliability connections. The KS-T922 Wire Splicing Machine is able to cut, form and crimp the copper tape in one motion with no wasted material.

  • The Crimp Cradle uses a highly efficient tooling set which provides a mechanical advantage, when handcrimping of approximately 10 to 1. If a hand tool requires 20Kg of operating force the Crimp Cradle willrequire only 2Kg to perform the same operation.

  • Benefits of using the Crimp Table:◦ Up to 400 pieces per hour can be achieved due to less handling and shorter cycle times. Reduces operator fatigue due to less effort.◦ Greatly reduces risk of Repetitive Strain Injuries.

Showing 1 - 11 of 11 items