List of products by manufacturer Ulmer Gmbh

per page
Showing 1 - 12 of 26 items
  • The cable accumulator KSP 8000 can be used as speed regulator as for example for coil unwinders of the SAR-range (i.e. SAR800, SAR1000, SAR1250).

  • The corrugated tube cutting machine WSM30 E is suitable to cut non-slitted corrugated tubes of 5 mm (NW 3) to 32.0 mm (NW 26) outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.

  • The corrugated tube cutting machine WSM60 E is suitable to cut non-slitted corrugated tubes of 5 mm (NW 3) to 60 mm (NW 50) outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.

  • The corrugated tube cutting machine WSM60 ESB is suitable to cut corrugated tubes on the wave crest or to cut tubes of special geometries in a burr-free procedure. The WSM60 ESB was particularly designed to process tubes of special forms, as for example applied in the automotive industry, medical industry and white goods.

  • The SG400 and SG400 V cutters have been specially developed for the requirements for cutting large-format cables or cross sections. With their power potential, they are able to cut dimensionally stable hoses up to an outer diameter of 30 mm and cables up to a cross-section of 200 mm² (Cu stranded in SG400 V).

  • Developed as a table device with two-hand operation, the cutting machine SK300 has been especially designed for the processing of shrinking tube with a width of up to 300 mm.

  • The eccentric cutting machine SX30 has been developed to cut hose materials in extrusion process or alternatively to process as a solitary machine. Due to the servo-driven cutting head and the fast cutter hub, short lengths can be processed at high speed.

  • The hose cutting machine SSM60 is suitable to cut closed and slitted corrugated tube, PVC, rubber hose as well as further types of hoses with an outer diameter of up to 60 mm. Due to the applied guillotine-cut ( blade is fixed in a 45°-angle), a precise cutting angle as well as a high cutting quality is achieved.

  • For the speed regulation of – for example – coil unwinders of the SAR-range (i.e. SAR 800, SAR 1000, SAR 1250), the linear accumulator LSP5000 is ideally suited. The compact design offers a space-optimized positioning between the SAR and the processing machine.

  • The motor-driven unwinders of the ARG30 MF series are mainly designed to unwind hose coils such as corrugated tubes, hydraulic and high press air tubes as well as similar material. The unit is also applicable for light wire harnesses and rubber-profile coils.

  • The unwinder ARG650 S is a compact and powerful unit, designed to unwind coils with a flange diameter of up to 650 mm. Due to the integrated cable storage, wire can be fed – with only a low back pull – into the manufacturing process. If required, the cable storage can additionally be charged with further weights. The large safety door allows a comfortable...

  • The Pre-feeder ZG15 S is suitable to discharge light and thin materials from processing lines.

Showing 1 - 12 of 26 items