Other Equipment There are 23 products.

per page
Showing 1 - 12 of 23 items
  • For many years we build pneumatic hot stamping marking devices. They are used for one or both sides printing of cables, wires and hoses or comparable materials. It can text or images, colored markers are printed as rings or bars or even custom designs. The procedure is safe and environmentally friendly.  

  • Paper winding up unit ROLL.UP.100for separating paper of crimp contact-roll    Papers are precisely wound    mounting on all standard presses    synchronous run    Winding width 60mm (standard); Variant to 150mmWidth of coil:     ROLL.UP.100     up to 2.36“ (60,0 mm)ROLL.UP.150     up to 5.91“ (150 mm)

  • Soft clampingfor smooth holding of cables and wires     Particularly suitable for semi-rigid cables and soft isolations    Operation possible with all common cable-stripping machines    pneumatic operation    maintenance-free

  • The cleaning of wires and cables during process of production is becoming increasingly important – that’s why we have developed the BERI.CO.CLEAN. In particular, coaxial and high-voltage cables for electric and hybrid vehicles must be clean. Even the smallest metal particles, which are generated during the stripping works, may result in subsequent...

  • The Pawomat SMPL Weatherseal assembly machine is the ultimate bench top solution to high quality and consistent terminated weather seal assembly. The SMPL initiated by the insertion of the cut cable end will insert the weatherseal strip the cable to the correct position and crimp the terminal around both the  cable conductors and weatherseal

  • Kirsten K700 the ALL ELECTRIC solution to cable stripping and crimping machines using the industry standard 40mm stroke applicator. The machine cycle is initiated by the insertion of the cable cut end accommodating very short stripping lengths for close applications.

  • Kirsten PP3 stripping and crimping machines designed for very fine accurate crimping applications. Dedicated crimping tools will accommodate either left handed and rear fed terminals OR right handed and rear fed terminals dependent upon the crimping / stripping press being either a Left or Right handed machine.

  • The Electric Crimping Press ECP1500 is an extremely versatile crimp machine for loose piece terminals. The press has parallel closing jaws with interchangeable Die Sets. .

  • All Electric Cable / Tube cutting machine with processor control. Suitable for Tubes or sleeves which are thin walled or manufactured from soft material which collapse when compressed by the feed rollers.

  • All electric cable / Tube Cutting Machine with microprocessor control. Designed to efficiently cut round cables up to 10 dia. Flat cables up to 120mm wide.

  • HOTweezers® represents the state of the art design and construction of thermal wire strippers. The hand unit is shaped like a pair of cut off tweezers and weighs less than 2 ounces (57g) including cable and connector. Because of this, the HOTweezers® Thermal Wire Stripper fits comfortably in the users hand and the wire stripping operation is smooth and...

  • The WDT CBL-25 Bench Mounted Pneumatic Crimping Machine designed to accommodate the range of WDT interchangeable Die sets up to 6sqmm copper tube and copper sheet terminals up to 16sqmm. and end terminals up to 50sqmm.

Showing 1 - 12 of 23 items