"CASTUGNON" C551HXA

C551HXA

New product

Full Automatic Double End Crimping Unit
A new product has come up in the HX series "High Speed Automatic End Crimping Unit".
It makes it possible to process 10,600 wires per hour. (25% more compared to C511HX series)
You can use terminals which one under 27mm. 
The display has a high level of visibility and a liquid-crystal touch display in 5.7 inch.

More details

Ordering

To order this item or for further information please get in touch.

We are happy to answer any questions you may have and can supply orders of any size, from a single component to an entire factory floor.

Contact

Online: online form

Email:

Phone (UK): 07768 361444

Phone (Intl): +44.7768 361444

More info

"Simple and Compact"
This machine is highly efficient and has an amazing processing ability.
This machine makes a revolution in the processing wire machine world.
"CASTUGNON C551HXA"
KODERA pursues ingenious ideas and creations to not only increase performance of the machines but also making it easy to operate the machines for users KODERA makes it possible to provide down-sides machines and applicators for saving space.
This machine is a remakable device with KODERA's advanced technology.

The Super Giga Power Machine
HIGH SPEED AUTOMATIC END CRIMPING UNIT
CASTUGNON C551HXA

The "C551HXAS" has a cross roller unit that comes standard.
HIGH SPEED AUTOMATIC END CRIMPING UNIT
CASTUGNON C551HXAS
 「FASTEST MACHINE」
 ITS SPEED IS UP 25% COMPARED TO C511HX SERIES.

The machine has an in-line crimping station to feed wires smoothly.
Therefore it makes possible to reduce unnecessary time to swivel.
Furthermore, it greatly reduces the crimping cycle because of the new crimping press.
The machine can process for 10,600 wires / hour. (When crimping both ands 75mm.)      CRIMP FORCE MONITOR FOR STANDARD.

It has high sensitivity so that it can detect crimping failure.
For example, if a core wire cut, core sires come out, terminal failure, sheath is too long.
Moreover, it watches other fault occurrences.

STRIP LENGTH
(FRONT/REAR)
0.1~7.0mm
MINIMUM PROCESSING LENGTH 62mm~

C551HXA_L.gif


※When crimping both ends, the size is from one side wire front to another side neck bottom.
MAXIMUM CUTTING LENGTH 99,999mm (About 100m)
CUTTING TOLERANCE ±(0.1+0.0005×L)mm  L=Cutting length
APPLICABLE WIRE SIZE AWG#18~AWG#32 (Depend on wire type)
Please inquire about AWG#16 or less and more than AWG#34.
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, etc.
CRIMPER TERMINAL Open barrel chain terminals (Side feed) Total length is less than 27mm.
CRIMPER CAPACITY Standard : 1.2ton / At maximum : 2.5ton
CONTROL METHOD Digital control
OUTER DIMENSION W620mm×D550mm×H1,210mm
WEIGHT 193kg (with mini conveyer)
POWER SUPPLY Single phase AC100V~240V (Free) 50/60Hz
AIR SUPPLY 18NL/min 0.5MPa (Use clean dry and air only)
POWER CONSUMPTION During rest : 120W / At Maximum : 760W
 APPLICATOR SPECIFICATIONS
CRIMPER SIDE OUTER DIMENSION W27mm×D23mm×H79mm
WEIGHT 150g
ID INFORMATION 1. Terminal information (model number / manufacture)
2. Wire type
3. Core diameter
4. Crimp height
5. Crimp force
6. Appropriate stripping length
7. Crimp position data
8. Shot number (max 8 digits)
9. Trip shot number (max 7 digits)
10. Administrator (or owner)
11. control lot no.
DIES SIDE OUTER DIMENSION W39mm×D30mm×H57mm
WEIGHT 145g
ID INFORMATION 1. Terminal information (model number / manufacture)
2. Shot number (max 8 digits)
3. Trip shot number (max 7 digits)
4. Administrator (or owner)
5. Control lot no.
Optional terminal location sensor integrated ID-tag, wireless RF approx, 100kHz data send / receive device.
 PROCESSING CAPACITY (NUMBER OF PROCESSED WIRED PER HOUR)
TOTAL LENGTH PIECES
75mm 10,600
100mm 10,400
300mm 8,950
500mm 7,850
1,000mm 5,350
2,000mm 4,100
PROCESSING CONDITION WIRE : UL1061 AWG#26
TERMINAL : 0-0179227-1 (CT2)
SETTING : Speed / Fast
Use CPD-06