Full Automatic Double End Crimping Unit
This machine is highly efficient, simple and compact.
This machine has the ability to crimp with 2.5 tons.
The machine has automatic setting function of crimp force and "crimp force monitor" which displays the condition of crimped end in a graphic form on a LCD Screen.
We adopt full color 10.4 inch LCD touch panel.
This product is no longer in stock
We also have the C551SZ, which has a crimp height automatic reproduction mechanism.
It makes it possible to invoke a processing data for the height of Ram so that you don't have to adjust height by hand.
No idling before processing.
Utilizing stepping motors in major drive mechanism, the machine eliminates idling almost completely.
Measurement correction for improved accuracy.
Sometimes the processed length can be shorter than the displayed length, due to back tension and other factors.
To correct these problems, this model includes a measurement correction feature to ensure accuracy.
High-precision crimping press installed.
KODERA developed a highly accurate crimping machine.
It makes it possible to improve crimping quality with a crimp force monitor.
Crimping of flag-shaped terminal.
Allows switching from the standard terminal processing to the flag-shaped terminal processing with ten key.
Setting process with memory data search.
Specify the job number in memory storage to recall the wire data.
Easy to set-up change.
You can easily retool parts.
When you exchange parts, you just need single screw.
Adjustment of front / rear cutter settings.
You can set the front and rear blade differently.
This is ideal when processing special type of wire, such as glass wire.
Applicator from any manufacture can be used.
Using the attachment base of each manufacture, you can attach and detach any type of applicator.
Processing data record of every lead.
The processing data and log can put into USB memory.
The data can keep as product record and useful for quality control.
FRONT SETTABLE VALUE 0.1～30mm
REAR SETTABLE VALUE 0.1～20mm
MINIMUM PROCESSING LENGTH 44mm ～
※When crimping both end, the size is from one side wire front to another side wire neck bottom.
MAXIMUM CUTTING LENGTH 99,999mm （About 100m）
CUTTING TOLERANCE ±(0.2+0.002×L)mm Ｌ＝Cutting length
APPLICABLE WIRE SIZE AWG#12～AWG#32（Depending on wire type）
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, Glass wire, etc.
CRIMPRE TERMINALS Open barrel chain terminals (Side feed / End feed)
CRIMPER CAPACITY 2.5ton
OUTER DIMENSION W1090mm×D720mm×H1,365mm
POWER SUPPLY Single phase AC200V、AC220V、AC240V 50/60Hz
AIR SUPPLY 25NL/min 0.5MPa（Use clean and dry air only）
POWER CONSUMPTION During rest ： 340W / At maximum ： 1,600W
PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)
TOTAL LENGTH PIECES
PROCESSING CONDITION Wire ： 0.5sq(AWG#20)
Front and Rear END ： Stripping 4.5mm
For further information on Kodera Crimp Force Monitoring please follow the link http://www.kodera.co.jp/english/castugnon/point.html