C385A
New product
POWERFUL AND SMOOTH !
BELT FEED HAS EVOLVED THE CASTING.
Casting C385A doesn't damage the core wire since stripping is performed with special round blade and cutting of the wire is processed with v-blade all together.
Belt feed system has actualized the flexible process.
Because it can grasp the face of the cable whose surface is unless, which is covered by coating material and is delicate.
This product is no longer in stock
Availability date:
Compared to before roller system, it can hold wire wider and send them powerfully.
Furthermore, it shows power for supply of CABTIRE cables whose surface is un-level, or shield wires etc. You can change the position of front stripping unit.
If you set it near to front belt feed, it will dissolve the stretching coating of wire, which often occur when stripping front side.
Technical Specification
MODEL CASTING C385A
CUTTING LENGTH 210~99,999mm
CUTTING TOLERANCES ±(0.1+0.0005×L)mm
L=Indicate a cutting length
STRIPPING LENGTH FRONT END Maximum length 1,500mm
(Semi-stripping is necessary)
REAR END Maximum length 210mm
(Semi-stripping is necessary)
APPLICABLE WIRE SIZE AWG#7(10sq)~#28(0.08sq)(Depending on the wire type)
Biggest outer diameter :φ11mm
APPLICABLE WIRE TYPE ABS Wire, Air back wire, Shield cables, VSF, IV, KV, UL, Teflon, Glass Wire etc.
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
OUTER DIMENSION W716mm×D430mm×H266mm
WEIGHT 44kg
POWER SUPPLY AC100V~AC240V(Single phase) 50/60Hz
POWER CONSUMPTION Rated : 50W Max : 350W
AIR SUPPLY 0.06Nl/min 0.5MPa
(Use clean, dry air)
PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)
TOTAL LENGTH [LONG STRIPPING LENGTH]
Pieces [SHORT STRIPPING LENGTH]
Pieces
500 mm - 2,022
700 mm 891 -
1000 mm 769 1,263
1500 mm 628 918
2000 mm 530 726
2500 mm 458 598
3000 mm 27 -
PROCESS CONDITION Both ends stripping : 100mm
Semi stripping : 50mm
Setting speed : 9
ON Time : 0.1 Sec
OFF Time : 0.1 Sec Both ends stripping : 60mm
Semi stripping : 30mm
Setting speed : 9
ON Time : 0.1 Sec
OFF Time : 0.1 Sec