ZG200 B2SP
New product
The feeding unit ZG200 B2SP is suitable for the processing of cable, wire and tubes with a max. diameter of 12.0mm. The cables have to be flexible as well as suitable for the running wheel diameter of 160mm. The material is feeded via two synchronically running coated conveyor belts. In conjunction with the upper belt limiter, all materials can be processed gently.
This product is no longer in stock
Availability date:
The feeding unit ZG200 B2SP is suitable for the processing of cable, wire and tubes with a max. diameter of 12.0mm. The cables have to be flexible as well as suitable for the running wheel diameter of 160mm. The material is feeded via two synchronically running coated conveyor belts. In conjunction with the upper belt limiter, all materials can be processed gently.
The drive is powered by an efficient servo motor.
The ZG200 B2SP is mounted on an aluminium base frame (equipped with a solid steel mounting plate) at which the cable storage is mounted directly. The speed of the ZG200 B2SP is controlled via the – at the dancer arm mounted – potentiometer. By means of a separate pressure regulator, the weight of the dancer arm can be pneumatically adjusted to the different cable cross sections.
Cutting- and stripping machines can be connected via plug connections.
Technical Specification
Drive motor: servo motor 560 Watt
Speed: up to 2.7 m/sec
Length (incl. dancer arm): 1200 mm
Depth: 550 mm
Height: 1500 mm
Feeding height/-width: up to 12 mm
Discharge height: 1090 mm (950 mm optionally)
max. coil weight: 100 kg
Unit weight: 110 kg
Compressed air supply: 3 bar max.
Power supply: 230 V / 50-60 Hz / 16 A