View larger
Eccentric cutting machine SX30
SX30
New product
The eccentric cutting machine SX30 has been developed to cut hose materials in extrusion process or alternatively to process as a solitary machine. Due to the servo-driven cutting head and the fast cutter hub, short lengths can be processed at high speed.
More info
Amongst others, the servo-controlled cutting head enables to process punch-cuts on – for example -paperliners. By this type of cut, the product is cut, but not so the carrier material which can be rolled up again in the following process.
To place down the processed items, the SX30 can optionally be equipped with an unloading conveyor belt with a collecting tray and blower.
For integration in an extrusion process, the SX30 can also be amended by a three-step-controller to adjust the speed.
Length input:0.1 mm stepsUpper belt lift:pneumatically, limited mechanicallyWeight:130 kgPower supply:230 V / 50-60 HzCollection tray with blower:optionally available
| Drive motor: | servo |
| Cutting head: | servo motor |
| Length: | 1500 mm |
| Depth: | 900 mm |
| Height: | 1800 mm |
| Control panel: | membrane keyboard |
| Display: | multilingual (selectable) |
| Operating hours and counter: |
included |
| Stop at end of material: | included |
| Feeding rate: | 60m/min |
| max. length input: | 999,999 mm |
| Throughput height/-width: | up to 30 mm |
| Air supply: | 6 bar / 87 psi |
| Unloading conveyor belt: | optionally available |