Abisofix Enamel Wire Stripper
The Abisofix Enamel Wire Stripper is an all - purposetool capable of removing the
enamel insulation from copper wire to facilitate termination, e.g. soldering wire
ends of stator and transformer coils. The Abisofix Magnet Stripper stripping head
utilises three weighted tungsten carbide blades, the depth of stripping being
controlled by a low voltage bench power supply/speed control unit.
This product is no longer in stock
Enamel Stripper is also available with an optional strip length limited, fitted to the
stripping head for accurate and repeatable results.
For batch production an optional electric foot switch and bench holder are also available.
Abisofix Enamel Wire Stripper Options
PS42 Power Supply (MUK6100):
Switchable 110v/220v Power Supply Unit. Will power one hand piece
Abisofix Hand Piece (CF0330):
This is the hand piece that plugs into the PS42 Power Supply for the
unit to work. You can specify which stripping
head you require fitted to this hand piece from the
different types listed below.
(CF0331): There is also an Abisofix Enamel Wire Stripper with a Drilled
out body for longer stripping lengths.
Standard Stripping Head:
A1 Head – Enamel Film 0.2 -0.8mm O.D (CF0270),
A3 Head – Enamel Film 0.6 - 2.0mm O.D (CF0280),
A5 Head – Enamel Film 1.2 - 4.5mm O.D (CF0290).
Standard Stripping Head inc Length Stop:
A1/LM Head – Enamel Film 0.2 - 0.8mm O.D (CF0270/LM),
A3/LM Head – Enamel Film 0.6 - 2.0mm O.D (CF0280/LM),
A5/LM Head – Enamel Film 1.2 - 4.5mm O.D (CF0290/LM)
AS Stripping Head (CF0291):
In special applications, especially with electronics it may be necessary to
strip up very close to a component.
Flat Blade Set Stripping Head:
Stripping of cables and wires with a larger wall thickness. Only
available with strip length stop and blade limiting.
AFLM3 Head – 0.6 - 4.0mm O.D (CF0294),
AFLM5 Head – 2.0 - 5.0mm O.D (CF0295).
Small Stripping Head:
Stripping and cleaning of wire pins of varnish or solder metal. Minimum
distance of pins 5mm. Stripping length 0.5 - 30mm. The pin diameter is slightly adjustable.
AK1 Head – 0.5mm Diameter Wire/Pin,
AK2 Head – 0.6mm Diameter Wire/Pin,
AK3 Head – 0.7mm Diameter Wire/Pin,
AK4 Head – 0.8mm Diameter Wire/Pin (CF0296),
AK5 Head – 0.9mm Diameter Wire/Pin (CF0301),
AK6 Head – 1.0mm Diameter Wire/Pin,
AK7 Head – 1.1mm Diameter Wire/Pin,
AK8 Head – 1.2mm Diameter Wire/Pin (CF0298).
Model R (CF0130):
Rasp head for rectangular section.
Model H (CF0340):
Twisting Hook for twisting two or more wires together.
Twisting Stripped Stranded Wires Heads:
Model AV3 Head – 0.18 - 2.5mm² (CF0297),
Model AV5 Head – 0.25 - 6.0mm² (CF0302).
Abisofix Bench Holder & Footswitch (CF0099):
Turns the Abisofix into a bench mounted unit. Hand piece is not included. This also
includes a conversion of the PS42 Power Supply to suit the foot switch.
Abisofix Enamel Wire Stripper Technical Data:
Dimensions: 40 x 180mm
Weight: Hand piece 455g including cord
Voltage: PS42 PSU Input 220 -240v or 110v Output 42v
Warranty: 12 Months