The Gamma T20 Crimping Press with a heavy duty base plate, The main Shaft is supported by two conical bearings for reliability and extended life.
The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press.
This offers accurate, quality cable stripping and crimping.
This product is no longer in stock
Utilising an oversize RA50 gearbox coupled to a synchronous 1 HP electric motor the T20 produces 2 tonnes of power which is suitable for crimping cables up to 6sq.mm. The press is suitable for crimping most types of terminals and will accept standard 40mm stroke applicators, (other strokes are available upon request).
The press can initiated by foot pedal for bench type applications or can be integrated into a fully automatic cable stripping and crimping system.
The applicator base plate is the standard three point quick release type and the machine is supplied with a universal terminal reel support to cater for both side and rear feed terminal types.
Electric motor : Synchronous
Motor Power : Kw 0.75 (1hp)
Motor Speed : 1400 rpm
Gearbox type : RA 50
Reduction Ratio : 1:7
Gearbox Transmission Capability : Kw 1.8
Torque : Nm 75
Crimping Capacity : 6 sq.mm (9AWG)
Press Construction : Steel Plates
Press Power : 2 tonne
Press Stroke (standard) : 40mm (other available upon request)
Press Speed : 6000cycles / hour
Electrical Power : 240volt 50Hz OR 3 phase
Overall Weight : 85Kg
Overall Dimensions : H680 x 290 x 260mm