The Gamma T25 electromechanical Crimping Press is of cast iron construction with the main Shaft supported by two conical bearings for reliability and extended life.
The CSM Cable Stripping Module is manufactured for both the T20 and T25 and be be supplied as a stripping and crimping machine or retrofitted to an existing crimping press.
This offers accurate, quality cable stripping and crimping.
This product is no longer in stock
Utilising an oversize RA70 gearbox coupled to a self braking 1 HP electric motor the T25 produces 2.5 tonnes of power which is suitable for crimping cables up to 10sq.mm. The press is suitable for crimping most types of terminals and will accept standard 40mm stroke applicators, (other strokes are available upon request).
The press can initiated by foot pedal for bench type applications or can be integrated into a fully automatic cable stripping and crimping system.
The applicator base plate is the standard three point quick release type and the machine is supplied with a universal terminal reel support to cater for both side and rear feed terminal types.
Electric motor : Self Braking Type
Motor Power : Kw 0.75 (1hp)
Motor Speed : 1400 rpm
Gearbox type : RA 70
Reduction Ratio : 1:7
Gearbox Transmission Capability : Kw 3.9
Torque : Nm 166
Crimping Capacity : 10 sq.mm
Press Construction : Cast Iron
Press Power : 2.5 tonne
Press Stroke (standard) : 40mm (other available upon request)
Press Speed : 6000cycles / hour
Electrical Power : 240volt 50Hz OR 3 phase
Overall Weight : 95Kg
Overall Dimensions : H780 x 290 x 260mm